Cookie Img
Send Inquiry
Home » Products » Aluminum Sheet and Plate » Customizable Aluminum Sheet for Marine

Customizable Aluminum Sheet for Marine

Customizable Aluminum Sheet for Marine
Customizable Aluminum Sheet for Marine
Product Code : 13
Product Description

Leveraging on rich industrial experience of 23 years, we are affianced in manufacturing, exporting and supplying fine-in-class Customizable Aluminum Sheet for Marine. The offered sheet is manufactured under the surveillance of our skilled professionals using quality approved aluminum and modern techniques at our well-maintained unit. This sheet is widely used for manufacturing of ships and boats. Prior to dispatch, we test this sheet on several parameters to ensure its durability. Besides, the provided Customizable Aluminum Sheet for Marine can be purchased from us at reasonable prices.


Features:

  • Corrosion resistance
  • Accurate dimension
  • Enhanced durability
  • Great strength  

Customizable Aluminum Sheet for Marine

Product Description

Features of 5000 series

1. Can be referred to as aluminum and magnesium alloys. The main elements for magnesium, magnesium content between 3-5%.
2. Non-heat-treatable alloy
3. Low density, high tensile strength, elongation rate is high. Good corrosion resistance, good weldability, cold workability is good.

Technical standard

Aluminum plate with the national standard (GB/T 3880-2006), is applicable to the unity of the aluminum alloy plate material standards.

The application scope of 5083 aluminum plate

5083 aluminum plate is often used in materials for ships, ships, vehicles, cars and aircraft plate weldments pressure vessel, which is to be strict fire prevention, cooling device, television tower, drilling equipment, transportation equipment, missile component and armor.

The chemical composition of 5083 aluminum plate

  • Al: Aluminum allowance
  • Si: 0.4 or less
  • Cu: 0.1 or less
  • Mg: 4.0-4.9
  • Zin: 0.25
  • Mn: 0.40-1.0
  • Ti: 0.15 or less
  • Cr: 0.05-0.25
  • Fe: 0.4
  • Individual: 0.05
  • Total: 0.15

The mechanical properties of 5083 aluminum plate

  • Tensile strength: σ B (MPa): 110-136
  • Elongation delta: δ 10 (%): ≥ 20
  • Annealing temperature: 415 ° C.
  • Yield strength: σ S (MPa) ≥ 110
  • Elongation rate: δ 5 (%) ≥ 12

Range of application of 5052 aluminum plate

5052 aluminum plate is mainly used in the request high plasticity and good weldability, working in a liquid or gas medium low load parts, such as tank, gas or oil duct, and other various liquid containers made of deep drawing parts: Small load wire used for rivet. Also commonly used in the transportation vehicles, ships, sheet metal parts, instrument, lamps stent and rivet, metal products, electrical enclosure, etc.

Chemical composition of 5052

  • Al: Allowance; Si: 0.25;
  • Cu: 0.10; Mg: 2.2 ~ 2.8;
  • Zinc: 0.10; Mn: 0.10;
  • Cr: 0.15 ~ 0.35; Fe: 0.4 0.

Mechanical properties of 5052

  • Tensile strength (σ B ): 170~305MPa
  • Conditions to yield strength: σ 0.2 (MPa)≥ 65
  • Modulus of elasticity: (E): 69.3 ~ 70.7 Gpa
  • Annealing temperature: 345 °C.

The surface quality

1, The surface is not allowed to have crack, corrosion spots and nitrate.
2, On the surface, allowing a depth of no more than 8% of the nominal size peeling defect part wall thickness, air bubbles, surface roughness and the local mechanical damage, but the defects cannot be more than 0.5 mm, maximum depth defect sheet with a total area of no more than 5% of the total area.
3, Allow the supplier polishing along the longitudinal profiles until the surface is smooth.
4, Other requirements: Discussed by both sides.


Alloy grade

Temper

Thickness(mm)

Width(mm)

Length(mm)

5A02(LF2)
5052

O(M)

0.3-10

1000-1500

≤6000

H14/24(Y2)

0.3-6.5

1000-1500

≤6000

H18/28(Y)

0.3-4.0

1000-1500

≤6000

F.H112(R)*

5-80

1000-1600

≤6000

5A03(LF3),5A05(LF5)
5A06(LF6),5154,5154A,
52545083

O(M)

0.5-4.5

1000-1500

≤6000





F.H112(R)*

5-50

1000-1600

≤6000





YANTAI BAODI COPPER & ALUMINUM CO., LTD.
No.29 Moon Road, APEC S&T Industrial Park, Zhifu District, Yantai - 265500, Shandong, China
Ms. Sunny Mao (Sales Manager)
Send Inquiry


Buyers Helpdesk

Let tradeindia.com find Quality Suppliers for you!

I agree to abide by all the Terms and Conditions of tradeindia.com
YANTAI BAODI COPPER & ALUMINUM CO., LTD. All Rights Reserved.